1depth

상세
RWC502x_SW_V1.332_20211026

RWC5020A/B/M and RWC5021P PC Software Release V1.332 October 26 2021

 

It is strongly recommended to uninstall the old software from your PC before installing V1.332.


[Caution]

1. This PC Application will be run correctly only if the SW and FW version is matched(FW V1.330 or higher)

2. This detects RWC5020A/B/M or RWC5021P automatically.

 

[Upgrade]

 

[Bugs fixed]

1. Fixed the error of displaying tested result in Pre-certification test and performance test function

2. Fixed the MIN MAC INTERVAL’s minimum value 10 to 5

 

 

RWC5020A/B/M and RWC5021P PC Software Release V1.331 October 18 2021

 

It is strongly recommended to uninstall the old software from your PC before installing V1.331.


[Caution]

1. This PC Application will be run correctly only if the SW and FW version is matched(FW V1.331)

2. This detects RWC5020A/B/M or RWC5021P automatically.

 

[Upgrade]

1. Added function to scan IP connected with RWC502x.

2. Added “□ Stop link after test“ option in the performance test. By unchecking the option, there is no need to reset the DUT when users do the performance test again. Owing to this function, the

reading APPS_KEY, DEV_ADDR, NWKS_KEY values action was removed.

3. Excluded the RWC502x user manual and application manual from the application, and put a link instead.

 

[Bugs fixed]

1. Fixed value crash due to value limitation error with step power in the performance test function

2. Added missed units such as MHz, Sec, dBm.

 

 

RWC5020A/B/M and RWC5021P PC Software Release V1.330 October 12 2021

 

It is strongly recommended to uninstall the old software from your PC before installing V1.330.


[Caution]

1. This PC Application will be run correctly only if the SW and FW version is matched(FW V1.330)

2. This detects RWC5020A/B/M or RWC5021P automatically.

 

[Upgrade]

1. Added AS923-4 to support the Israel region.

2. Removed the temporarily added IL-917/KZ-865 regional parameter for Israel local testing.


[Improvement]

1. Enabled RWX502x control via COM port

2. Added a function to change the address and type of IP of RWC502x via COM port

3. Added reading APPS_KEY, DEV_ADDR, NWKS_KEY values so that there is no need to join again  during the same DUT test.

4. Increased the number of digits of the measured frequency counter value in Hz

 

[Bugs fixed]

1. Fixed value crash due to  value limitation error with project parameters.

2. Fixed abnormal operations with “,” for decimal symbols

3. Fixed incorrect information and redundancy in the pre-certification report and Non-regression test report

4. Fixed the incorrect "RX GAIN RANGE" information of RWC5020A

5. Changed the "FM_DEVIATION" range for FSK in NST TX from 10-100KHz to 1-100KHz in NST function

6. Fixed the hidden channel group selection box to show in US region, LoRaWAN version 1.0.4

 

  • #14008, OfficeSection Bld, SK M-city, 195, Baengma-ro, ilsandong-gu, Goyang-si, Gyeonggi-do, Korea

  • +82-70-7727-7011

  • sales@redwoodcomm.com