[LoRaWAN] 1. [Pre-Certification] 2. Added certification test items for DUTs classified as END-DEVICE, as defined in the Relay Mechanism Test Specification. [RF Performance] 3. Added system clock offset vs. PER function to RX Sensitivity. The system clock offset is adjusted in ppm units. This function tests how much clock offset the device can tolerate by varying the system clock of packets transmitted from the RWC5020X and measuring the reception limit. This function is available only for RWC5020B/M [NST] 4. [Link Analyzer] 5. Added End-device under Relay test mode to EDT. When RELAY_MODE is set to ON, the RWC5020X emulates the complete system including Network Server, Gateway, and Relay. In this mode, the RWC5020x receives WOR messages sent by the DUT and responds with WOR ACK as needed, providing an environment that simulates DUT communication with a Relay. 6. When calculating the MIC for the FragSessionSetupReq used in FUOTA, we originally included the message padding. Due to a customer request, we modified the firmware in V1.513 to exclude the padding from the MIC calculation. However, we believe this change was incorrect. We have therefore reverted the modification once again include the padding in the MIC calculation. |
